Follett Horizon HCC1400W Ice Machine Description
This Follett Horizon Ice Maker is the perfect addition to any commercial kitchen or restaurant. With its efficient water-cooled system, it quickly produces chewable ice, also known as Chewblet (Pebbled or Nugget ice). This model, HCC1400W, operates on a supply voltage of 208/230 V, making it suitable for most establishments. The brand Follett is known for producing high-quality refrigeration equipment, and this ice machine is no exception. It uses a horizontal, cylindrical evaporator to freeze water on its inner surface. The refrigeration cycle is continuous; there is no batch cycle. The evaporator is flooded with water and the level is controlled by sensors in a reservoir. A rotating auger (22 RPM) continuously scrapes ice from the inner wall of the evaporator. The auger moves harvested ice through the evaporator into an ice extrusion canal. The ice is forced through a restrictive nozzle that squeezes out the water and creates the Chewblet. The continuous extrusion process pushes the Chewblets through a transport tube into a dispenser or bin. A solid state PC board controls and monitors the functionality of the ice machine. In addition to sequencing electrical components, the board monitors various operational parameters. A full complement of indicator lights allows visual status of the machine's operation.
Additionally, the PC board controls the self-flushing feature of the icemaker. The evaporator water is periodically drained and replenished to remove minerals and sediment. A unique “bin full” detection system is incorporated in the Horizon icemaker. A switch located at the ice discharge port of the machine detects the position of the transport tube. When the bin fills up with ice, the transport tube moves out of the normal running position, and the switch turns the ice maker off. A domed housing at the end of the transport tube contains the ice extrusion loads during shut down.
Specifications:
Electrical Each icemaker requires its own separate circuit with electrical disconnect within 10 ft (6m). Equipment ground required. Standard electrical – 208-230/60/1 Maximum icemaker fuse – 20 amps each Amperage – 12 amps 6 ft (2m) NEMA 6-20 cord and plug provided on icemaker Plumbing 3/8" OD push-in water inlet 3/4" MPT drain 1/4" FPT condenser inlet (water-cooled condenser only) 1/4" FPT condenser drain (water-cooled condenser only) Notes: 3/4" vented drain line must slope a minimum of 1/4" per foot (6mm per 30.4cm run). Drain to be hard piped and insulated. To prevent back flow, do not connect drains. Separate drains for icemaker and condenser. Water shut-off recommended within 10 feet (3m). Follett recommends installation of a Follett water filter system (part# 00130286) in icemaker inlet water line. Ambient Air temperature 100˚F/38˚C max. 50˚F/10˚C min. Water temperature 90˚F/32˚C max. 45˚F/7˚C min. Water pressure – potable 70 psi max. (483 kPa) 10 psi min. (69 kPa) Note: Water-cooled condenser pressure 150 psi (1034 kPa)
INCLUDES:
Follett Diverter Valve module #0016776
Follett IMDV-2 Ice Manager, Diverter Valve Operator Module
We Ship worldwide. Shipping to a commercial address is $299. If you require liftgate service it’s an additional $75. If it’s being delivered to a residence there’s an additional $75 residential delivery fee on top of that. These charges are not ours it’s what the trucking companies charge. We ship via common carrier. Local pickup available.
“FLAT RATE SHIPPING IS ONLY VALID FOR LOWER 48 CONTIGUOUS STATES TO A COMMERCIAL ADDRESS WITH A DOCK, FORKLIFT OR VIABLE WAY TO UNLOAD THE FREIGHT.
AK, HI, PR & INTERNATIONAL MUST MESSAGE FOR SHIPPING QUOTE.”